⢠Piezoelectric barometric pressure sensor
⢠Low power consumption
⢠Operating pressure:
AB 60 (S31105) 800 ... 1100 hPa (mbar)
AB 100 (S31205) 600 ... 1100 hPa (mbar)
Measurement principle and mounting
The piezoelectric pressure sensorâs signal is electronically ampliïĴ ed to provide
an output signal of 0...5 VDC. The sensor is mounted in a stainless steel housing,
protection class IP64 when the connector is plugged in.
If required, the sensor is ready for connection in an Ammonit steel cabinet.
When mounted outside the central steel cabinet we recommend protective hous-
ing with pressure compensation.
In measurement operation the sensor needs an extern supply of at least 9 VDC.
Barometric Pressure Sensor AB 60 / AB 100
page 1/2
SpeciïĴ cations
Characteristics AB 60 AB 100
Order-No. S31105 S31205
Operating pressure 800 ... 1100 hPa (mbar)
(Altitude: ⤠1400 m)
600...1100 hPa (mbar)
(Altitude: ⤠3700 m)
Slope 60 hPa/V 100 hPa/V
Offset 800 hPa 600 hPa
Temperature operation range -40 ... 85 °C
Humidity range 0 ... 98 %RH
Accuracy
Total accuracy (-10 ... 60 °C) Âħ1 % FSO* (Âħ3 hPa; FSO is 300 hPa) Âħ1 % FSO* (Âħ5 hPa; FSO is 500 hPa)
Repeatability Âħ0.1 % FSO* Âħ0.2 % FSO*
Long term stability Âħ0.1 % FSO* Âħ0.1 % FSO*
Electrical data
Output voltage 0 ... 5 VDC
Supply voltage 9 ... 32 V
Current consumption 5 mA
General
Dimensions Length 72 mm, diameter 22 mm
Weight 80 g
Housing Stainless steel
Connection 4-pole plug (M12)
Protection class IP 64 - when connector is plugged in
Vibration (5 ... 500 Hz) 2 gRMS
Mechanical shock 50 g
Atmosphere non-ionic, non-corrosive
* FSO (Full Scale Output) describes the difference of the upper and the lower limit of the pressure range.